Holley

Holley 750 CFM Street HP Carburetor #0-82750

  • Sale
  • $487.76
  • Regular price $602.95
Shipping calculated at checkout.


Vacuum Secondary-4150
The Street HPΓäó uses the best features from Holley's race Bred 4150 HPΓäó carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HPΓäó and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor.

Installation Notes: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

Features:

  • Vibratory polished for good looks
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
  • Optimized street/strip calibration for outstanding throttle response and drivability
  • Contoured venturri inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Two corner idle for precise idle control
  • Quick change vacuum secondaries allows use on a wide range of vehicles
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
Barrels 4
Booster Down Leg
Brand Holley
CFM 750
Choke None
Emission Code 3
Finish Shiny
Fuel Gasoline
Fuel Inlet Dual
Material Aluminum
Model 4150
Primary Main Jet 77
Primary Power Valve 4.5
Primary Pump Nozzle Size 31
Product Type 4150 Model Carburetor
Secondaries Vacuum
Secondary Main Jet 84
Supercharged Application No
Throttle Bore 1.688 inch
Venturii Size 1.375 inch
Warning California Proposition 65
Warranty Limited 90 Day

Click here for Instructions for Part# 0-82750

Click here for Carburetor Numerical Listing for Part #0-82750