Fabricated Valve Cover hardware kit for 6862G, 890005 (Silver Finish)
We've all run into this problem working on our project. You get in a hurry. It's late and you are tired as you've been out in the shop wrenching for hours. You go to button things up by putting your trick looking fabricated valve covers back on your heads and it happens! You drop a washer or multiple washers, you drop a bolt into the abyss of your engine bay and can't find it, or you have one of those really nice shops with a drain in the floor and the bolt and/or washers fall down into the drain, never to be seen again. Holley to the rescue with replacement valve cover hardware kits for our popular fabricated valve cover kits.
Installation Notes: ** Recommended Torque spec for these Valve cover bolts are 28-34 in/lbs. ***
Overtightening of these bolts can result in deformation of the valve cover and over compression of the gasket resulting in oil leaks.
- Hardware kits are available in either Silver or black finish to match your valve covers
- Kits include correctly sized bolts and washers for more than (80) part numbers
- Available hardware kits work with Fabricated Valve cover offerings from Mr. Gasket, Sniper, Quick Fuel Technologies, and even our GM Licensed covers
- These kits are a simple solution to going to the local hardware store trying to find something that will work
|Application||Big Block Chrysler|
|Product Type||Valve Cover Bolts|
|Valve Cover Bolt Size||1/4-20 x .75"|
|Warning||California Proposition 65|